Scandvik A2.5 4-Color LED Downlight w/ Stainless Steel Trim, 8-30V (41416P)

The Scandvik A2.5 is a compact, high-output LED downlight built for overhead exterior applications like T-tops, hard tops, and mezzanines. Its polished 316 stainless steel bezel matches the mirror-finish trim seen on the fixture, while the frosted lens diffuses light evenly for a clean, glare-free glow. Installation is simple: a 2-inch mounting hole and spring-loaded butterfly clips hold the fixture firmly in place, and only a basic 2-wire, 2-position on/off toggle switch is required to operate it.

What sets the A2.5 apart is its intelligent onboard circuitry, which lets you cycle through four light colors — white, blue, red, and green — without any special controllers or multi-position switches. Simply flick the switch off and back on within 1.5 seconds to advance to the next color; leaving it off longer than 1.5 seconds resets the fixture back to white. With a wide 8-30V input range, it runs on both 12V and 24V marine electrical systems and carries an IP67 rating for reliable performance in wet, exterior marine environments.

• 316 stainless steel housing and trim ring with mirror-polished finish
• 4 selectable colors: white, blue, red, green — switched via simple on/off toggle
• Wide voltage range: 8-30V DC, compatible with 12V and 24V systems
• 286 lumens output
• IP67 sealed, weatherproof construction for exterior use
• Recessed/flush mount with spring-loaded butterfly clips; 2 in. mounting hole
• Simple 2-wire installation, no special controller needed
• Ideal for T-tops, hard tops, mezzanines, and other overhead exterior locations