
Lumitec SeaBlazeX2 Underwater LED Light - Dual Color White/Blue - Polished Housing (101592)
From the entry
Lumitec SeaBlazeX2 is the next-generation successor to the industry-leading SeaBlazeX underwater light, delivering exceptional brightness and reliability in a polished, marine-grade housing. SeaBlazeX2 delivers the exceptional performance, quality, and value of the industry-leading SeaBlazeX, with 60% greater output. SeaBlazeX2 delivers more than 6,000 integrating-sphere-measured lumens, surface mount, no external drivers, and a pedigree of reliability recognized the world over.
Built for durability in demanding marine environments, this dual-color model lets you toggle between crisp white and vivid blue illumination using a simple on/off switch - no separate controller box required. The Lumitec SeaBlazeX2 is a surface-mount LED underwater light that runs on 10-30 vDC (12V or 24V systems) and uses an IP68-rated sealed housing for continuous submersion, with white output rated at 6,000 lumens while drawing 5A at 12V DC or 2.5A at 24V DC (60W). It features a solid naval bronze housing with a heat-tempered glass lens, in a surface-mount footprint measuring 3.94 in diameter and 0.85 in depth, with a 1/2 in cable pass-through. This particular version comes finished in a mirror-polished housing to complement bright hardware on your transom or hull.
- Output: More than 6,000 integrating-sphere-measured lumens
- Color Modes: Internally synchronized white/blue cross-fade mode plus dedicated white-only and blue-only settings, switched via quick on/off toggling
- Installation: Surface mount with small 1/2" through-hull hole and simple 3-wire hook up, no external controller boxes required
- Construction: Solid naval bronze housing with a heat-tempered glass lens, finished in polished chrome-like plating
- Sealing: Completely water sealed and IP68 compliant
- Power: 10-30 vDC input for 12V and 24V boats; 5A at 12V DC or 2.5A at 24V DC (60W)
- Footprint: Surface-mount footprint: 3.94 in diameter, 0.85 in depth; 1/2 in cable pass-through
- Control: Compatible with the PLI-enabled Poco System for enhanced convenience and cutting-edge control
Specifications
| Type | Underwater LED Light |
|---|---|
| Brand | Lumitec |
| Model | SeaBlazeX2 (101592) |
| Lumens | 6000+ |
| Voltage | 10-30V DC (12V/24V) |
| Wattage | 60W |
| Quantity | 1 |
| IP Rating | IP68 |
| Mount Type | Surface Mount |
| Cable Length | 1/2 in cable pass-through |
| Color Output | White/Blue (Dual Color) |
| Housing Material | Marine-Grade Bronze, Polished Finish |
More Marine & Boating
Shop all →


